top of page

SHARC Small Boarder.png

SHARC Industries, LLC

Premium Quality Aftermarket Bandsaw Parts and OEM Components

Stocking Parts for Amada, Behringer, Clausing, Daito, Danobat, DoAll, Everising, Friggi, Forte, Hem (HE&M), Hydmech, Kalamazoo, Kasto, Kysor Johnson, Marvel, Mastercut, MEP, Missler, Peddinghaus, Peerless, Pheonix, Spartan, Tannewitz, Wells, W.F. Wells and many more...

We also produce parts to sample

Need Help?

Call

1-440-377-5657

BAND SAW REPAIR

WEBSITE DISCLAIMER

SHARC Assortment of Blade Guide Components for Hydmech Band Saws

Please Continue to Scroll Down for Backup Guides and Guide Hardware

This Guide Set Fits Hydmech Saws using a 1.00" Wide Blade and equipped with the listed cross numbers.

NC1.00HYD-802132

New Guide Set for Hydmech Band Saws - 1.00" Wide Blade

This Side Guide Set fits Hydmech DM-10 / S20 Series III Saws using a 1.00" Wide Blade equipped with the listed cross numbers from the factory.

NC1.00HYD-S3

New Side Guide Set for Hydmech Band Saws - 1.00" Wide Blade

Side Guides for Hydmech This guide kit fits the S23HMA, S23HMP, DM13/18P using a 1.250" Wide Plate and any saw using the listed cross numbers.

NCS23HYD

New Side Guide Set for Hydmech Band Saws - 1.250" Wide Blade

This Blade Guide Kit includes all 4 Side Guides and 3 Backup Carbides. Fits Hydmech H-14 and any other saw running a 1.250" blade & calling out the listed cross numbers.

HYD-0901208

Complete Blade Guide Kit for Hydmech Band Saws

This Side Guide Set fits Hydmech S25 Series Saws.
The corresponding backup guide HYD-BU-3203 is sold separately.

NC1.50HYD-L

Side Blade Guide Set for Hydmech Band Saws - 1.50" Wide Blade

Fits Hydmech Saws using a 3.00" Blade.

NC3.00HYD

New Side Guide Set for Hydmech Band Saws - 3.00" Wide Blade

This Backup Guide Pair fits Various Older Hydmech Saws equipped with the listed cross number from the factory.

HYD-BU-3203

Backup Guide Pair for Hydmech Band Saws

This Backup / Top Guide Pair fits Hydmech Saws using a 2.00" Wide Blade and Some Older Saws using a 2.625" Wide Blade that were equipped with the listed cross numbers from the factory.

HYD-BU-2.00

Backup Guide Pair for Hydmech Band Saws - 2.00" Wide and Older 2.625" Wide Blade

This Backup / Top Guide Pair fits Hydmech Saws using a 3.00" Wide Blade that were equipped with the listed cross numbers from the factory.

HYD-BU-3.00

Backup Guide Pair for Hydmech Band Saws - 3.00" Wide Blade

This Guide Set fits Hydmech Saws using a 1.00" Wide Blade equipped with the listed cross numbers from the factory.

NC1.00HYD

New Side Guide Set for Hydmech Band Saws - 1.00" Wide Blade

This Side Guide Set fits Hydmech Saws using a 1.250" Wide Blade and using the listed cross numbers.
Corresponding Backup Guides are Part Number HYD-BU1

NC1.25HYD

Side Blade Guide Set for Hydmech Band Saws - 1.250" Wide Blade

Fits Hydmech H11 and any other Saw equipped with the listed cross numbers utilizing a 1.250" wide blade.

NCH11HYD

New Side Guide Set for Hydmech Band Saws - 1.250" Wide Blade

This Side Guide Set fits Hydmech Saws utilizing a 1.50" Wide Blade where the Blade Guides are Manually Clamped with a Lever. Corresponding Backup Guides are Part Number HYD-BU1.

NC1.50HYD

Side Blade Guide Set for Hydmech Band Saws - 1.50" Wide Blade

Fits Hydmech Saws utilizing a 2.00" wide blade and the listed cross numbers.

NC2.00HYD

Side Blade Guide Set for Hydmech Band Saws - 2.00" Wide Blade

Fits Hydmech Saws using a 3.00" Blade. This set of guides differs from the standard set as the Movable guides have the hole on center with a reduced hole size. Very few saws will utilize this guide set. Please call us if you need help determining which blade guides you need.

NC3.00HYD-Spec1

New Side Guide Set for Hydmech Band Saws - 3.00" Wide Blade

This Backup Guide Pair fits Hydmech DM10 & S20 Series III Saws equipped with the listed cross numbers from the factory.

HYD-BU-S3

Backup Guide / Top Guide Pair for Hydmech Band Saws

This Brass Bodied Backup / Top Guide fits Hydmech Saws using a 2.00" Wide Blade and Some Older Saws using a 2.625" Wide Blade that were equipped with the listed cross numbers from the factory.

HYD-800758

Individual Backup Guide for Hydmech Band Saws - 2.00" Wide and Older 2.625" Wide Blade

This Guide Clamp Handle Assembly is used on Smaller Hydmech Bandsaws to tighten / clamp the Blade Guides.

HYD-813348

Guide Clamp Handle Assembly for Hydmech Band Saws

This Side Guide Set fits Hydmech DM-8 Saws using a 1.00" Wide Blade equipped with the listed cross numbers from the factory.

NC0901203HYD

New Side Guide Set for Hydmech Band Saws - 1.00" Wide Blade

This Side Guide fits Hydmech S25 Saws using a 1.250" Blade.

NC1.25HYD-L

New Side Guide Set for Hydmech Band Saws - 1.250" Wide Blade

This Carbide Blade Guide Set fits Newer Hydmech H14 machines along with any other calling for the listed cross numbers running a 1.250" wide blade.

NC1.25HYD-01017

Side Blade Guide Set for Hydmech Band Saws

This Side Guide Set fits Hydmech Saws utilizing a 1.50" Wide Blade where the Blade Guides are Hydraulically Clamped. Corresponding Backup Guides are Part Number HYD-BU1.

NC1.50HYD-H

Side Blade Guide Set for Hydmech Band Saws - 1.50" Wide Blade

Fits Hydmech Saws utilizing a 2.625" wide blade and the listed cross numbers.

NC2.625HYD

Side Blade Guide Set for Hydmech Band Saws - 2.625" Wide Blade

This Backup Guide Pair fits Older Hydmech Saws using 1.00", 1.250" and 1.500" Wide Blades and equipped with the listed cross numbers from the factory.

HYD-BU1

Backup Guide / Top Guide Pair for Hydmech Band Saws

This Backup Guide Pair fits various Hydmech Saws equipped the listed cross numbers from the factory.

HYD-BU-010.1731

Backup Guide / Top Guide Pair for Hydmech Band Saws

This Backup / Top Guide Pair fits Hydmech Saws using a 2.625" Wide Blade that were equipped with the listed cross numbers from the factory.

HYD-BU-2.625

Backup Guide Pair for Hydmech Band Saws - 2.625" Wide Blade

This Disc Spring (Bellville Washer) is used on various Hydmech Saws as part of the Guide Clamp Lever Assembly. 6 Pieces are needed per guide handle.

HYD-342025

Disc Spring for Hydmech Band Saws

bottom of page