top of page

SHARC Components for Cosen Band Saws

This Damper Roller is used to reduce Blade Vibrations on any Cosen saw calling for the listed cross number

COS-AGB3301

Vibration Damper Roller for Cosen Band Saws

Metric Flat Washer, Fits any Cosen Machine calling out PPA-10 Flat Washer.

COS-PPA10

Flat Washer for Cosen Saws

This Hollow Bolt is used to secure the Damper Roller and to house a grease fitting on various Cosen Saws.

COS-AGB3309

Grease Nipple Screw for Cosen Band Saws

This Side Guide Set fits Cosen C20 Series Saws running a 1.00" Wide Blade

NCC20Cosen

Side Blade Guide Set for Cosen C20 & C20SA Band Saws

This Side Guide Set fits Cosen Saws running a 2.00" Wide Blade and calling for the listed cross numbers*

*On certain Cosen saws the parts book calls out these part numbers but the coolant guides are reversed. This means the ports and the coolant grooves will be facing the wrong way and that the parts book is incorrect. Please take a look at your existing coolant guides and match them up with the photo to ensure you are ordering the correct set for your saw.  On this set, the coolant on the Fixed Guide is discharged to the Right and on the Movable Guide it is discharged to the Left.

NC2.00Cosen-SDM

Side Blade Guide Set for Cosen Band Saws with 2.00" Wide Blade

This Top Guide / Backup Guide Pair fits a wide array of Cosen Sawing Machines.

Cos-AHA0704A

Carbide Backup Guide Pair for Cosen Saws

This Straight Shaft or Straight Pin is utilized to hold the Backup Guides into the Guide Holders on any Cosen Machine calling for the listed cross number.

Cos-AHA07131

Backup Guide Pin (Straight Shaft) for Cosen Band Saws

This Machine Screw is utilized on the Cosen 520/560 Guide Roller to secure the rubber seal. Also fits any other Cosen machine calling for PJA-3-6 flat head screw.

COS-PJA36

Flat Head Screw for Cosen Saws

This "Seal Rubber Ring" is utilized on Cosen Damper Rollers to protect the internal bearing.

COS-AGB3308

Rubber Seal for Cosen Band Saws

This "Seal Hole Diameter 8.0 mm" is utilized on Cosen Damper Rollers to protect the internal bearing.

COS-AGB3307

Rubber Seal for Cosen Band Saws

This Side Guide Set fits Cosen Saws running a 1.250" Wide Blade and calling for the listed cross numbers.

NC320Cosen

Side Blade Guide Set for Cosen 250 & 320 Series Band Saws

This Side Guide Set fits Cosen Saws running a 2.00" Wide Blade and calling for the listed cross numbers with an exception*. 

*On certain Cosen saws the parts book calls out these part numbers but the coolant guides are reversed. This means the ports and the coolant grooves will be facing the wrong way and that the parts book is incorrect. This guide set is special as was created just for those machines. Please take a look at your existing coolant guides and match them up with the photo to ensure you are ordering the correct set for your saw.  On this set, the coolant on the Fixed Guide is discharged to the left and on the Movable Guide it is discharged to the right.

NC2.00Cosen-SDM-A

Side Blade Guide Set for Cosen Band Saws with 2.00" Wide Blade

This Top Guide / Backup Guide Pair fits various Cosen Sawing Machines calling for the listed cross numbers.

COS-MJS9008

Carbide Backup Guide Pair for Cosen Saws

This Proximity Sensor / Prox Switch is utilized on Cosen Saws to detect blade wheel motion and to display blade speed.

Cos-EP904321

Proximity Switch for Cosen Saws

Utilized in the Blade Brush assembly this Universal Joint fits any machine calling for Cosen Part Number PP-15011

COS-PP15011

Universal Joint for Cosen Band Saws

This Brush Bulley Bracket Assembly comes fully assembled and ready to install. Used to hold the brush drive belt that powers the Blade Brush. Fits saws calling for Bearing Holder number AHA-1211 or AHA12110-1.

COS-AHA121101

Wire Brush Bearing Seat Assembly for Cosen Band Saws

Used to mount the Wire Blade Brush this shaft fits any Cosen Saw calling for the listed cross number

COS-AHB0519

Blade Brush Shaft for Cosen Band Saws

This Side Guide Set fits Cosen Saws running a 1.50" Wide Blade and calling for the listed cross numbers.

NC460Cosen

Side Blade Guide Set for Cosen 460 & 420 Series Band Saws

This Side Guide Set fits Cosen Saws running a 2.625" Wide Blade and calling for the listed cross numbers. For a quick install, SHARC Ships the guides with the coolant fittings installed.

NC800Cosen

Side Blade Guide Set for Cosen 800 Series Band Saws

This Roller Bearing is Utilized on Cosen Saws to alleviate blade twist prior to the Carbide Guides or as a Guide Roller.

Cos-PP14270

Blade Guide Roller for Cosen Band Saws

This Rotary Encoder is utillzed on the feed vise to determine vise position. Fits all Cosen Saws calling for the listed cross number.

COS-EP90491K

Rotary Encoder for Cosen Band Saws

This Grease or Zerk Fitting is utilized on any Cosen Machine calling for Part Number PUC-020.

COS-PUC020

Grease Nipple for Cosen Band Saws

This wear plate fits Cosen 420 Series and any other saw calling for the listed cross number.

COS-AHE2804

Vise Wear Plate for Cosen Band Saws

This Wire Blade Brush is used to remove Chips from the Saw Blade on Various Machines. SHARC Brushes include NO FUSS Install and Support Washers to Increase time of Service.

PP-58002

Wire Blade Brush for Cosen Band Saws

This Side Guide Set fits Cosen Saws running a 1.50" Wide Blade and calling for the listed cross numbers.

NC2028Cosen

Side Blade Guide Set for Cosen 2028 Series Band Saws

This Side Guide Set fits Cosen Saws running a 3.00" Wide Blade and calling for the listed cross numbers.

NC3.00Cosen

Side Blade Guide Set for Cosen Band Saws Running a 3.00" Wide Blade

This Spring is internal to the Guide Clamp or Guide Tightening Knobs on Cosen AH-300H, AH-400H or any other Machine calling for the listed cross number.

Cos-AHA0710

Guide Pusher Spring for Cosen Band Saws

bottom of page