$365.00 SHARC # A-OMM32A-C
plus shipping and handling for one Motor as shown. Motor is Exact Replacement
Significant Characteristics:
Proudly Made
In the U.S.A.
All Blade Guides
Place Your Order Now at 440-377-5657
Replaces Part Numbers: OMM32A-C, 10331059, OMM-32-151G0003, 10569003 & 11154303
Hydraulic Driven Auger Motor for Amada Saws
Chip Conveyor Parts for Amada 250 Bandsaws
$265.00 SHARC # A-250-110V-CPK
plus shipping and handling for one Coolant Pump Conversion Kit as Shown. Kit includes all wiring, instruction sheet with schematics, Coolant Line, Controls and Clamps.
FIts all 250 saws using belt driven gear pump for coolant. Uses existing fittings.
Replaces Part Numbers: M-452-1
Belt Driven Coolant Pump for 250 Saws
Replaces part #'s, M-452-1 Gear Pump, no true OEM Counterpart.
SHARC 110VAC Coolant pump conversion allows the operator to wash down the saw WITHOUT the blade running and WITHOUT the head lowering. Utilizes all factory wiring but one connection, no extension cords, no additonal power supply needed.
110VAC Coolant Pump Kit for 250 Saws
$248.05 SHARC # A-M4521-CP
plus shipping and handling for one Gear Pump as shown. Direct Bolt on, utilizes existing fittings and lines. No Modifications required.
Place Your Order Now at 440-377-5657
FIts Older 250 saws With No Chip Auger.
This is the Top Filter Plate and is Made of Stainless Steel.
Replaces Part Numbers: 10354729, 1105025a / Unlike the OEM,
the SHARC Unit has a Center support beam to add strength.
Coolant Tank Perforated Plate for Older 250 Saws
$85.25 SHARC # A-1105025a
plus shipping and handling for one Stainless Steel Coolant Tank Perforated Plate as shown.
FIts Older 250 saws With No Chip Auger.
This is the Bottom Filter Plate and is Made of Stainless Steel.
Replaces Part Numbers: 10309506, 1105026 / Unlike the OEM,
the SHARC Unit has a Center support beam to add strength.
Coolant Tank Filter Screen for Older 250 Saws
$88.25 SHARC # A-1105026
plus shipping and handling for one Stainless Steel Coolant Tank Filter Screen as shown.
FIts Older 250 saws With No Chip Auger.
This is the Perforated Plate inside the tank and is Made of Stainless Steel.
Replaces Part Numbers: 10309428, 01025b
Inside Coolant Tank Perforated Plate for Older 250 Saws
$29.91 SHARC # A-01025b
plus shipping and handling for one Stainless Steel Coolant Tank Perforated Screen as shown.
FIts all 250 Saws Using a Belt Driven Coolant Pump
Replaces Part Numbers: 10361009, KNF-04, 10361008 or SFT-0-100W
Coolant Suction Filter for All 250 Saws
Using a Belt Driven Coolant Pump
$27.00 SHARC # A-SFT02100W
plus shipping and handling for one Coolant Suction Filter as shown.
SHARC Saw Parts for Amada Bandsaws
SHARC Coolant
and Auger Components for Amada® 250 & 250W Saws
Place Your Order Now at 440-377-5657
$275.00 SHARC # A-1105942
plus shipping and handling for Spiral Auger Shaft as shown.
Replaces Part Numbers: 1105942 & 10379324
Chip Conveyor Spiral Shaft for All 250 Saws with Outboard Auger Motor
Coolant Screens & Coolant Filters for Amada 250 Bandsaws
Significant Characteristics:
Replaces Part Numbers: 1106552 & 10383235
Made with Stainless Steel Mesh for extended life.
Bucket / Screened Bucket for Amada 250 Series Saws
Part Number: A-1106552 $234.96 plus shipping and handling for one Screened Bucket as shown.
Significant Characteristics:
Replaces Part Numbers: 1115262 or 10389806
Made with Stainless Steel Mesh for extended life.
Chip Receiver for Amada 250 Series Saws
Part Number: A-1115262 $212.00 plus shipping and handling for one Chip Receiver as shown.
Significant Characteristics:
Replaces Any washdown Nozzle utilizing 10mm Line. Equipped with snap ring for proper insertion into brush housings.
Washdown Nozzle for Amada Saws with Shut Off
Part Number: A-WDN-2 $48.00 plus shipping and handling for one Nozzle as shown.
Special Solid Center Auger for Amada 250 Series Equipped with Spiral Shaft 1106669b
Significant Characteristics:
Replaces Numbers: 1106669b & 10371322
This Auger was designed especially for saws producing normal to smaller chips. Where the light, hollow OEM unit fails, this unit pulls through. The specially designed mounting hub fits directly to your existing stub shaft. The Auger is the correct OD and length for a perfect fit. Not recommended for stainless steel or other stringy chips.
Part Number: A-110669B-SCA $258.59 plus shipping and handling for one Auger Shaft as shown.
Contact us at:
Voice: 440-377-5657
Fax: 440-236-3529
Email: sharcsawsupply@aol.com
Contact us at:
Voice: 440-377-5657
Fax: 440-377-5657
Email: sharcsawsupply@aol.com
$225.00 SHARC # A-CCK-001
plus shipping and handling for one Rebuild Kit as shown. All parts needed for the Auger Drive rebuild.
Significant Characteristics:
Replaces Part Numbers: 1280685B, RSL40SL-42, MB1620-24FDU, SCB-16, M8X50-304SUS, 6X28 Spring Pin. This kit rebuilds all 250 series saws using the in tank drive set up.
Chip Conveyor Rebuild Kit for Amada Saws
Three Way Coolant Valve for Amada Saws
Part Number: A-604593 $117.19 plus shipping and handling for one Three Way Coolant Valve as shown.
Signigicant characteristics:
Replaces Part #'s 604593
SHARC Part # A-604593
