Bandsaw Parts, Saw Parts, Band saw Parts, Blade Guides, Saw Guides, Carbide Blade Guides, Hem Guides, Hem Saw Parts, Hem Parts, Hem Saws, Hydmech Parts, Hydmech Saws, Hydmech Guides, Hydmech Saw Parts,
Hydmech Bandsaws, Hydmech Band Saw, Amada Parts, Amada Guides, Amada Saw Parts, Amada Saws, Amada Bandsaw Parts, Amada Band Saw Parts, Amada Blade Brush, Amada Blade Guides, Amada Carbide Guides, Amada Belts, Bandsaw Blade Guides, Band Saw Blade Guides, Behringer Saw, Behringer Saw Parts, Behringer Parts, Behringer Blade Guides, Behringer Saw Guides, DoAll Saws, DoAll Saw Parts, DoAll Parts, DoAll Blade Guides,, DoAll Bandsaw Parts, DoAll Band Saw Parts, Kasto Guides, Kasto Parts, Kasto Saws, Kasto Saw Parts, Kasto Blade Guides, Kasto Bandsaws, Kasto Bandsaw Parts, Kasto Band Saw Parts,
Daito Parts, Daito Saws, Daito Saw Parts, Daito Bandsaws, Daito Band Saw Parts, Marvel Saws, Marvel Parts, Marvel Saw Parts, Marvel Bandsaw Parts, Marvel Machine Parts, Marvel Bandsaw, Marvel Band Saw, Marvel Blade Guides, Marvel Carbide Guides, Phoenix Parts, Phoenix Saws, Phoenix Bandsaws, Phoenix Saw Parts, Phoenix Bandsaw Parts, Spartan Saws, Spartan Saw Parts, Spartan Blade Guides, Spartan Saws, Spartan Bandsaw Parts, Wells Saw, Wellsaw Parts, Wells Parts, Blade Guides, Carbide Blade Guides, Bandsaw Guides, Saw Parts, Bandsaw Parts, Band Saw Parts, Hem, Hydmech, Amada, Behringer, Daito, DoAll, Kasto, Marvel, Phoenix, Spartan, Wellsaw, Vise Racks, Saw parts, Band Saw Parts, Blade Guides, Saw Guides, Bandsaw Repair Parts, Machine Repair, Saw Maintenance. SHARC Industries LLC, Saw Parts.
SHARC
Saw Parts for Amada Bandsaws
SHARC Vise Components for Amada®
250 & 250W Saws
Proudly Made
In the U.S.A.
All Blade Guides
Cut down on your maintenance costs with SHARC Racks. Replacing the brittle factory cast iron racks with our pre-hardened 4140 units will make tooth breakage a thing of the past.
SHARC Industries Vise Racks are machined from pre-hardened 4140 steel to greatly increase the life of the rack.
SHARC # 250SCVR
Cost # 250SCVR
$225.00 plus shipping and handling for one Standard Clamp Vise Rack (15 tooth) for Older 250's using a round Quick approach bar in which the front half of the front vise has not been cut down.
Multiple racks show for example only. Racks are sold individually.
Racks are drilled to work on the front or rear vise.
Standard Clamping Racks
SHARC Industries Vise Racks are machined from pre-hardened 4140 steel to greatly increase the life of the rack.
SHARC # 250ZCVR
Cost # 250ZCVR
$225.00 plus shipping and handling for one Zero Clamp Vise Rack (16 tooth) for Newer 250's using a flat quick approach bar or for Older 250's using a round quick approach bar in which the fron vise has been cut down.
Multiple racks show for example only. Racks are sold individually.
Racks are drilled to fit on the front or rear vise.
Zero Clamp Racks
Cost # 250PWL
$75.00 plus shipping and handling for one vise pawl as shown.
Vise Pawl
Cost # 250WSP
$95.00 plus shipping and handling for all three work support plates as shown..
Work Support Plates
Cost # 250VRK
$25.00 plus shipping and handling for vise cylinder rebuild kit as shown. 2 cylinder o-rings, 2 piston o-rings and 2 bushings.
Vise Cylinder Kit
Cut down on your maintenance costs with SHARC Pawls. Replacing the quick wearing factory cast iron pawls with our annealed 4140 units will make frequent pawl replacement a thing of the past. While harder than OEM, they are softer than our racks to aid in increased rack life.
Cost # 250-VCC
$135.00 plus shipping and handling for one vise Cylinder as shown. Fits all 250's using rack and pawl vises.
Cylinder ID is Nickel Chrome Coated and the OD is coated with Solvent Restistant Epoxy to match your saw.
Replaces Part #: 0602157A
Vise Clamp Cylinder
Vise Clamp Piston
Cost # 250VCP
$165.00 plus shipping and handling for one vise Piston as shown. Fits all 250's using rack and pawl vises.
Piston is machined of 4140 then Nickel Chrome Coated to resist wear. We have also strengthened the rod end to help alleviate breakage.
Replaces Part #: 1023C
Cost # 250VCS
$65.00 plus shipping and handling for one vise Spring as shown. Fits all 250's using rack and pawl vises.
Replaces Part #: 1105094A
Vise Clamp Spring
Cost # 250-FCBN
$67.50 plus shipping and handling for one
Feed Cylinder Bushing Nut as shown.
Replaces part #'s: 11066809, 10362902
Feed Cylinder Bushing Nut
For older 250's using Rack & Pawl Vises
Place Your Order Now at 216-272-0668
